During the months of April, May and June of 2019, I did many scans of the 28 MHz beacon band from about 28.160 to 28.340 MHz. This post is about the number of days that I heard one of the beacons in Germany.
The map above shows the distribution of 28 MHz beacons in Germany. Note that the DB0BER beacon near Berlin was off air during the period I was monitoring so it is not included in the data below.
The chart below shows the number of days in 2019 that I heard a German beacon on 28 MHz...
1) DL0IGI with its 50 watts into a vertical antenna was heard on 35 days and is easily the most consistent German beacon here in Ireland.
2) DL0UM has just 4 watts into a vertical dipole and was heard on 26 days. Like DL0IGI, it is about 200kms further away from me compared to some of the other beacons and perhaps the slightly longer skip distance made a difference?
3) DB0MFI (9w GP), DK0TEN (10w GP) and DB0TEN (2w GP) were all about the same mark with 22, 21 and 20 days respectively. (Note - GP is a ground plane vertical antenna)
4) DF0ANN (5w dipole) and DM0AAB (10w GP) at 16 and 14 days were noticeably behind. Was it just pure chance or was there a reason?
5) DB0FKS was heard on just 8 days but this can be easily explained due to the fact it has just 1-watt into a small DV-27 vertical antenna (i.e. a loaded mobile whip).
In terms of distance, the German beacons are about 1,200 to 1,500 kms from my location in Ireland.
In conclusion... The reason I collected this data was to see if there was any unusual findings.
a) Was there a difference in the number of days heard between North and South Germany? The answer seems to be no.
b) Did distance matter? Maybe but the evidence isn't that strong. I seemed to hear beacons at 1,200kms as often as ones at 1,400kms.
The main factor determining what I heard from my location in Ireland seems to be just power and antenna performance of the beacons.
German 28 MHz beacons... These are the current ones as of the end of 2019
28.205 MHz - DL0IGI - JN57MT - 50w Vert
28.210 MHz - DB0FKS - JN49IT - 1w DV27 GP
28.245 MHz - DB0TEN - JO42UV - 2w GP
28.257 MHz - DK0TEN - JN47NT - 10w GP
28.265 MHz - DB0ANN - JN59PL - 5w Dipole (Used to be DF0ANN)
28.273 MHz - DB0BER - JO62QL - 5w
28.278 MHz - DM0AAB - JO54GH - 10w GP
28.279 MHz - DB0UM - JO73CE - 4w Vert Dipole
28.285 MHz - DB0MFI - JN58HW - 9w GP
Methodology notes...
1) The equipment used for reception was a Kenwood TS690 transceiver with a vertical half-wave antenna. The take off to the east towards Germany is good with no obstructions.
2) I usually scan the beacon band on 28 MHz once I hear FT8 signals at a reasonable level that are easily audible. i.e. I know for sure the band is open.
3) All beacons must be positively identified before I post them on DXMaps which in turn puts them on the DX Cluster.
4) The mode of propagation for all signals heard was Sporadic-E.
